Stainless steel compact enclosures

Download Catalog
Stainless steel compact enclosures

COMPACT ENCLOSURES

The MPGAMMA compact integrated enclosures system is made entirely of AISI 304L stainless steel (Wnr 1.4307) and consists of structures with a single blind solid door or transparent door.
The purpose of the design was to create a product that allows both the standardization and the interchangeability of individual pieces with items also produced by MPGAMMA.
Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment. MPGAMMA has achieved Environmental type ratings 1, 12, 4, 4X.
Each individual enclosure can be made and drilled on a specific design, supplied by the customer, customized in every single detail and completed thanks to a wide range of accessories.

Products

SCS SERIES – Compact Enclosures Solid Door

  • Made of AISI 304L stainless steel (Wnr 1.4307).
  • NEMA type 1, 12, 4, 4X on specific demand; Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment.
  • Self-supporting frame 15/10 thick, bent and reinforced on the supporting points.
  • Stiffening frame on the inside of the door in strong galvanised carbon steel, tube and predrilled to DIN 25 mm pitch for fixing accessories.
  • Reversible front door opening a maximum of 120°.
  • Fine external satin finish, medium Scotch-Brite type.
  • Wiring plate in 25/10 thick galvanised sheet sliding in depth with larger wiring surface, insertion system on slides and quick fix device in the final position.
  • Removable rear panel and over top.
  • Polyurethane seal with robotised application.
  • Eyebolt lifting system.
  • 1 door version for widths up to 1000 mm.
  • 2 doors separate versions with central closing (hinges on the structure), removable centre upright for width 1600 mm.
  • 2 door version without centre upright for cabinets W=1200 for easy access at the front; the doors are hinged, one over the other, hence they have an opening priority and the ergonomic handle is only contemplated on the primary door.
  • Rod holder that allows the pin to rest when the door is closed.
  • Investment-cast hinge.
  • Multi-bend profiles for enhanced structural resistance.
  • Contact flap on gasket bent at 30° for improved door sealing up to IP67.
  • Handle with linear movement and integrated latch. The handle slide is easily interchangeable with a logo-free version, and the internal lock block is interchangeable with other types of locks.
  • Torx screws that restrict access to unauthorized personnel.
  • Protection class IP66, IP69, IK10 certified by TÜV SÜD according to EN 62208.

PLUS ON DEMAND FOR CUSTOMIZATION:

  • Material: AISI 316L (Wnr 1.4404).
  • Drilling: as per drawing on door, top and sides.
  • Dimensions: specials.
  • Seals: silicone.
Download SCS SERIES Data Sheet

SLS SERIES – Compact Enclosures Transparent Door

  • Made of AISI 304L stainless steel (Wnr 1.4307).
  • NEMA type 1, 12, 4, 4X on specific demand; Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment.
  • Self-supporting frame 15/10 thick, bent and reinforced on the supporting points.
  • Stiffening frame on the inside of the door in strong galvanised carbon steel tube, predrilled to DIN 25 mm pitch for fixing accessories.
  • Reversible front door opening a maximum 120°.
  • Fine external satin finish, medium Scotch-Brite type.
  • Wiring plate in 25/10 thick galvanised sheet sliding in depth with larger wiring surface, insertion system on slides and quick-fix device in the final position.
  • Removable rear panel and over top.
  • Polyurethane seal with robotised application.
  • Eyebolt lifting system.
  • 1 door version for widths up to 1000 mm.
  • 2 door separate versions with central closing (hinges on the structure), removable centre upright for widths 1200 mm and 1600 mm.
  • 2 door version without centre upright for cabinets W=1200 for easy front access; doors are hinged one above the other with opening priority and ergonomic handle on the primary door.
  • Rod holder that allows the pin to rest when the door is closed.
  • Investment-cast hinge.
  • Multi-bend profiles for enhanced structural resistance.
  • Contact flap on gasket bent at 30° for improved door sealing up to IP67.
  • Handle with linear movement and integrated latch; handle slide is easily interchangeable with a logo-free version and the internal lock block is interchangeable with other lock types.
  • Torx screws that restrict access to unauthorized personnel.
  • Protection class IP66, IP69, IK10 certified by TÜV SÜD according to EN 62208.

PLUS ON DEMAND FOR CUSTOMIZATION:

  • Material: AISI 316L (Wnr 1.4404).
  • Drilling: as per drawing on top and sides.
  • Dimensions: specials.
  • Seals: silicone.
Download SLS Series Data Sheet

Looking for a Custom Solution?

We design stainless steel enclosures tailored to your dimensions, certifications, and environment.
Request a Custom Design

Find the Perfect Product for Your Application!

Get expert guidance consultation today
tailored to your project needs.

Request Your Consultation