Pendant control panel, Joints and support systems, console

Lapp
This is how the products of Lapp Italia are defined, the company from Desio (MB) specialized in cables, pre-wired cables, cable glands, connectors and accessories for numerous industrial applications MP Gamma is equipped with SKINTOP®, the line of metric cable glands, in stainless steel, or nickel-plated brass, with thread for superior performance and suitable for any application.

• Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel.
• Fine external SATIN finish, medium Scotch-Brite type.
• Door opening a minimum of 120° with stainless steel inner hinges, locks with stainless steel double wing insert, welded and finished corners.
• Closure with anti-loss slotted screws.
• Polyurethane seal with robotised application.
• Rear prearrangement for wall fixing.
• Wiring plate ordered separately.

PLUS ON DEMAND FOR CUSTOMIZED

• Drilling as per design on body and door.
• Resistant silicone seals, from –50°C to +180°C.
• Products made with AISI 316L or other special steels.
• Special dimensions.
• Generic and specific accessories.

• Made of AISI 304L stainless steel (Wnr 1.4307).
• Roof integrated into the box body and inclined towards the front at 30°.
• Surface finish with very low roughness RA < 0.3 microns.
• Without inserts or holes.
• 120° internal hinges on left side (reversible on request).
• Door with sloped edges and internal hinges with opening at 120° on the left-hand side (reversible on demand).
• Robot-laid polyurethane sealing ring.
• Hygienic locks (1 or 2, according to the size).
• Mounting plate in zinc-coated metal sheet.
• Micro-fused hinges.
• Door with sloped edges and completely internal hinges with opening at 120° on the left-hand side (reversible).
• Silicone seal with robotised application.
• After a certain dimension size, it has a tubular reinforcement coupled with a support guide wheel.
• 30° inclined leading edges as per the CPN box series. This guarantees a homogeneous gasket compression.

PLUS ON DEMAND FOR CUSTOMIZATION

• Material: AISI 316L (Wnr 1.4404)
• Dimensions: special.

• Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel.
• Fine external satin finish, medium Scotch-Brite type.
• Door opening a minimum of 120° with transparent panel in shockproof Lexan.
• External door with inner hinges and locks with double wing insert in stainless steel.
• Galvanized sheet metal wiring plate with 20/10 thickness.
• Polyurethane seal with robotised application.
• Rear prearrangement for wall fixing with M6 blind threaded holes.
• Prearrangement for inner door mounting kit.
• Prearrangement for modular switches mounting kit (ordered separately).

PLUS ON DEMAND FOR CUSTOMIZED

• Material: AISI 316L (Wnr 1.4404)
• Panel door: possibility of laminated glass window.
• Drilling: as per drawings.
• Dimensions: specials.
• Seals: silicone.

• Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel.
• Fine external SATIN finish, medium Scotch-Brite type.
• Galvanized sheet metal wiring plate with 20/10 thickness.
• Door opening up to 120° with inner hinges and locks with double wing insert stainless steel.
• Polyurethane seal with robotized application.
• Rear prearrangement for wall fixing with M6 blind threaded holes.

PLUS ON DEMAND FOR CUSTOMIZED

• Material: AISI 316L (Wnr 1.4404)
• Drilling: as per drawings on body and door.
• Dimensions: specials
• Seals: silicone

• Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel.
• FINE external SATIN finish, medium Scotch-Brite type.
• Galvanized sheet metal wiring plate with 20/10 thickness.
• N. 02 swing doors opening a minimum of 120° with stainless steel inner hinges and locks with stainless steel double wing insert.
• Polyurethane seal with robotised application.
• Body with welded and finished corners.
• Stainless steel screws.
• Internal M6x16 stainless steel earthing threaded studs on the door and body of the box.
• Internal M6 threaded spacers on the body for wiring plate fixing.
• Sheet metal thickness values of the body and door from 12/10 mm to 20/10 mm depending on the size.
• Rear prearrangement for wall fixing with M6 blind threaded holes.

PLUS ON DEMAND FOR CUSTOMIZED

• Drilling as per design on body and door.
• Resistant silicone seals, from –50°C to +180°C.
• Products made with AISI 316L or other special steels.
• Special dimensions.
• Generic and specific accessories.

• Made of AISI 304L stainless steel (Wnr 1.4307).
• NEMA type 1, 12, 4, 4X on specific demand; Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment.
• 20/10 thick beam frame, bent and drilled, can be panelled on all sides.
• Reversible front door with a transparent panel in shock-resistant LEXAN.
• Fine external satin finish, medium Scotch-Brite type.
• Wiring plate in 25/10 thick galvanised sheet sliding in depth with larger wiring surface, insertion system on slides and quick-fix device in the final position.
• Removable rear panel and over top.
• Polyurethane seal with robotised application.
• Eyebolt lifting system.
• 1 door version for widths up to 1000 mm.
• 2-door versions with central closing, with or without removable central upright for widths 1200 mm and 1600 mm. In the 2-door versions, closing is in the middle of the centre upright and the hinges are on the sides of the structure; the doors are separate and have their own lock system.
• Uprights prepared for side-by-side mounting kit.
• Side fall-protection system (optional).
• Rod holder that allows the pin to rest when the door is closed.
• Investment-cast hinge.
• 6-bend profiles for increased structural strength.
• Rear panel with reinforcement crossbar.
• Contact flap on gasket bent at 30° for improved door sealing up to IP67.
• Handle with linear movement and integrated latch; handle slide is easily interchangeable with a logo-free version, and the internal lock block is interchangeable with other types of locks.
• Torx screws that restrict access to unauthorized personnel.

PLUS ON DEMAND FOR CUSTOMIZATION:

• Material: AISI 316L (Wnr 1.4404).
• Drilling: as per drawing on top and sides.
• Dimensions: specials.
• Seals: silicone.

The stainless steel modular enclosure system EGO with solid door is the result of innovation and versatility that allows various composition possibilities.

Guarantees safety in every environment where quality, hygiene, and high protection rating are required.

• Made of AISI 304L stainless steel (Wnr 1.4307).
• NEMA type 1, 12, 4, 4X on specific demand; Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment.
• 20/10 thick beam frame, bent and drilled, can be panelled on all sides.
• Reversible front door.
• Fine external satin finish, medium Scotch-Brite type.
• Wiring plate in 25/10 thick galvanised sheet sliding in depth with larger wiring surface, insertion system on slides and quick-fix device in the final position.
• Removable rear panel and over top.
• Polyurethane seal with robotised application.
• Eyebolt lifting system.
• 1 door version for widths up to 1000 mm.
• 2-door version with central closing, removable centre upright for widths 1200 mm and 1600 mm.
• Uprights prepared for side-by-side mounting kit.
• Side fall-protection system (optional).
• Rod holder that allows the pin to rest when the door is closed.
• Investment-cast hinge.
• 6-bend profiles for increased structural strength.
• Rear panel with reinforcement crossbar.
• Contact flap on gasket bent at 30° for improved door sealing up to IP67.
• Handle with linear movement and integrated latch; handle slide is easily interchangeable with a logo-free version, and the internal lock block is interchangeable with other types of locks.
• Torx screws that restrict access to unauthorized personnel.

PLUS ON DEMAND FOR CUSTOMIZATION:

• Material: AISI 316L (Wnr 1.4404).
• Drilling: as per drawing on door, top and sides.
• Dimensions: specials.
• Seals: silicone.

• Made of AISI 304L stainless steel (Wnr 1.4307).
• NEMA type 1, 12, 4, 4X on specific demand; Standard for Safety: UL 508A, Industrial Control Panels CSA C22.2 No. 14-13, Industrial Control Equipment.
• 20/10 thick beam frame, bent and drilled.
• Can be panelled on all sides.
• Reversible front door that opens maximum 120°.
• Fine external satin finish, medium Scotch-Brite type.
• Removable rear panel and over top.
• Polyurethane seal with robotised application.
• Uprights prepared for side-by-side mounting kit.
• Side fall-protection system (optional).
• Rod holder that allows the pin to rest when the door is closed.
• Investment-cast hinge.
• 6-bend profiles for increased structural strength.
• Rear panel with reinforcement crossbar.
• Contact flap on gasket bent at 30° for improved door sealing up to IP67.
• Handle with linear movement and integrated latch; handle slide is easily interchangeable with a logo-free version, and the internal lock block is interchangeable with other types of locks.
• Torx screws that restrict access to unauthorized personnel.

PLUS ON DEMAND FOR CUSTOMIZATION:

• Material: AISI 316L (Wnr 1.4404).
• Drilling: as per drawing on door, top and side panels.
• Dimensions: specials.
• Seals: silicone.

DetasUltra
Thanks to the DetasUltra division, the Detas Group of Rezzato (BS) represents excellence in cable management in electrical panels and electrical /electronic equipment.
To MP Gamma they supplies all multidiameter cable routing systems and in particular DES (Detas Entry System), the solution designed for simplify the use of pre-terminated cables, improve performance (watertight, tearproof, etc …) and optimize costs.